DZL coal biomass steam boiler
DZL series fast loading chain grate biomass boiler is single drum, longitudinal type, chain grate boiler, suitable for burning molding biomass fuel, or only fire coal or mixed coal and biomass. The front and back arches are supported by the water tube forming permanent arch. It burns various kinds of coal, good adaptbality to the inferior coal.
Introduction:
DZL series fast loading chain grate biomass boiler is single drum longitudinal type chain grate boiler. The boiler can burn coal and the mixture of coal and molding boimass. It has a economizer in the tail. It is equiped with blower and induced draft fan to ventilate and screw slag extractor. It is high efficient, energy-saving, environmental friendly. Mechanical ventilation with drum induced draft fan, and is equipped with spiral mechanical slag, controling and monitoring instrument. The boiler is safe and reliable.
Fuel: Biomass pellet, biomass molding fuel, bitumite,mixture of bitumite and biomass
Requirements of fuel: separated coal containing less clastic is better, coal less than 3 mm should less than 30%. Molding boimass moisture ≤15%, density: 800~1100㎏/m 3, bulk demension: 32×32×(30~80)mm,rod demension:φ30×(30~80)mm.
Application:
Burn biomass molding fuel , coal or mixed coal and biomass molding fuel to provide heat, or generate power.
Advantages:
1.new furnace structure avoid high temperature flame directly rediate the boiler bottom and bumps.
2.The design of flues makes the gas smoothly enter into the front smoke box, make the tube plate temperature is the same, avoid the tube plate cracking due to thermal stress.
3. single return threaded pipe enhance the heat-transfer effect. the threaded pipe with self cleaning function and avoid the soot formation in smoke.
4、The front and back arches are supported by the water tube forming permanent arch. It burns various kinds of coal, good adaptbility to the inferior coal.
5. advanced and reasonable grate side seal design, avoid the uneven air of both sides of the grate grate and burn out side seal.
6. independent wind regulation chamber under the fire grate, wind entrer from two sides. Adopt new crank arm screw adjusting structure, so that the air venting area ratio reaches 100%. Flexible adjustment, uniform wind. Design push-pull type damper soot cleaning device. The damper has gate of heat-resisting casting iron sealing structure, effectively prevent the deformation of the secondary combustion and air leakage of grate.